Echelon PCLTA-20 Guía de usuario descargar pdf (Pagina 28)

3-6 Configuring and Testing the PCLTA-20 Adapter

LonWorks® PCC10/PCLTA10/PCLTA20 Device Driver

Version: 1.25

Card Type: PCLTA-20

Driver Status:

Number of Free LTA Output Buffers-

Non-Priority: 3, Priority: 3

Loaded Image Size: 49408

Interrupt Count: 4

Figure 3.5 PCLTA-20 Diagnostics dialog box

Driver Status

The content of the device driver status is as follows:

• Number of Free PCLTA-20 Output Buffers:

Non-Priority: the non-priority application output buffer count, as calculated

by the driver based on information retrieved from the PCLTA-20 adapter’s

non-volatile EEPROM.

Priority: the priority application output buffer count, as calculated by the

driver based on information retrieved from the PCLTA-20 adapter’s non-

volatile EEPROM.

• Loaded Image Size: the size, in bytes, of the currently loaded PCLTA-20

system image. This may be zero if the PCLTA-20 adapter is in the initial

“boot” state.

• Interrupt Count: the number of interrupts the driver has processed for this

device. This value is set to zero when the device is physically reset.

Diagnostic Commands

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 44 45

Sin comentarios

Echelon PCLTA-20 Guía de usuario Pagina 28