Echelon i.LON SmartServer 2.0 Manual de usuario descargar pdf (Pagina 124)

110 Deploying Freely Programmable Modules on a SmartServer

7. This window lists the tasks to be performed, which consists of uploading the FPM to the

root/modules directory on the SmartServer flash disk, deleting any existing module with the same

name of the FPM being uploaded, rebooting the SmartServer if you selected the Reboot check

box in the Deployment Settings window in step 4, and optionally creating a default configuration

Web page if you selected the Default Web Page check box. Click Finish.

8. If you selected the Reboot check box in the Deployment Settings window in step 4, the Reboot

iLON SmartServer 2.0 dialog opens and prompts you to confirm that the SmartServer selected in

the Deployment Settings window in step 4 is to be rebooted.

9. Click Yes.

10. The FPM executable module (.app or .drv extension) is uploaded to your SmartServer. You can

use the console port to verify that the FPM is being uploaded to your SmartServer. If you are

updating an existing FPM application on your SmartServer, the current module is stopped and

unloaded, and the updated module is then loaded and initialized.

If FPM Programming is not licensed on your SmartServer, the following urgent messages will

appear when the SmartServer attempts to load and start the FPM executable module:

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 265 266

Sin comentarios

Echelon i.LON SmartServer 2.0 Manual de usuario Pagina 124