Echelon SmartServer 2.2 Hardware Manual de usuario descargar pdf (Pagina 30)

+12V < 20mA Output

The SmartServer contains one +12VDC outlet that can provide up to 20mA. The +12V <20mA output

is available on screw terminals 19 and 20. Screw terminal 20 is the +12V <20mA connection. Screw

terminal 19 is the system ground.

You can connect the +12V <20mA output on the SmartServer to a set of dry contacts in order to power

an active device that is connected to the digital input screw terminals.

The following figure illustrates the location of the 12V <20mA output screw terminals on the

SmartServer.

The following table lists the enclosure markings for the 12V <20mA output screw terminals on the

SmartServer and their connection type.

Screw Terminal

Enclosure Marking

+12V < 20mA Connection

GND

Ground

+12V < 20mA

+12 Volt output.

+12V <20mA Output

Digital Input Connectors

18 Assembling the SmartServer Hardware

1 2 ... 25 26 27 28 29 30 31 32 33 34 35 36 37

Sin comentarios

Echelon SmartServer 2.2 Hardware Manual de usuario Pagina 30