Echelon IzoT NodeBuilder Manual de usuario descargar pdf (Pagina 90)

Creating a NodeBuilder Project from the New Device Wizard

You can create a NodeBuilder project from the New Device Wizard in the IzoT Commissioning Tool.

To do this, follow these steps:

1. Create or open an IzoT CT network. See the IzoT Commissioning User’s Guide for more

information on creating and opening IzoT CT networks. If you plan on downloading your device

application to a device, make sure that the IzoT CT computer is attached to the network.

2. Drag a Development Target Device or a Release Target Device shape from the NodeBuilder

Basic Shapes 4.00 stencil to your network drawing. Use a Development Target Device if you

are building to a NodeBuilder hardware platform; use a Release Target Device if you are building

to the release hardware. You can drop the shape anywhere, but a good location is just below the

Channel 1 shape on your drawing.

3. The New Device Wizard opens. In the Device Name property, enter the device name, select the

Commission Device check box, and then select the Create New Device Template check box

under NodeBuilder Device Template.

76 Creating and Opening IzoT NodeBuilder Projects

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 290 291

Sin comentarios

Echelon IzoT NodeBuilder Manual de usuario Pagina 90