Echelon i.LON 10 Ethernet Adapter Manual de usuario descargar pdf (Pagina 14)

supply should be used with the power-line

model.

10Base-T Ethernet Port Standard 10BaseT connection, type RJ-45.

ONWORKS TP/FT-10 Port For the free-topology model, an orange

Weidmuller connector (Weidmuller model

#134686) connected to an Echelon TP/FT-10

transceiver. This port exists only on the free-

topology model.

Serial Port A DB-9 serial port. Can be used to connect

the i.LON 10 Ethernet adapter to a modem.

See

i.LON 10 Serial Port Pinout, below, for

more information about this port.

Service Pin Service pin is a recessed pushbutton used to

send a L

ONWORKS service pin message on the

ONWORKS channel. This button is also used

to perform a security access reset as described

in Security Access Reset.

i.LON 10 Serial Port Pinout

When connecting a DCE modem with a DB-9 serial port to the i.LON 10, the

signals are communicated as shown in Table 2-1.

Table 2-1

DCE Modem to DTE i.LON 10 Adapter Connection (DB-9 to DB-9)

Modem Signal

Name

Cable DB-9

Male

Cable DB9

Female

i.LON 10 (DTE)

DB-9 Male

DCD Pin 1 Pin 1 DCD—Pin 1

RxD Pin 3 Pin 3 RxD—Pin 2

TxD Pin 2 Pin 2 TxD—Pin 3

DTR Pin 4 Pin 4 DTR—Pin4

GND Pin 5 Pin 5 GND—Pin 5

DSR Pin 6 Pin 6 DSR—Pin 6

RTS Pin 7 Pin 7 RTS—Pin 7

CTS Pin 8 Pin 8 CTS—Pin 8

When connecting a DTE modem with requiring a null modem cable with a DB-9

serial port to an i.LON 10, the signals are communicated as shown in Table 2-2.

2-4 i.LON 10 Ethernet Hardware

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 81 82

Comentarios a estos manuales

Sin comentarios

Echelon i.LON 10 Ethernet Adapter Manual de usuario Pagina 14

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Echelon i.LON 10 Ethernet Adapter