Echelon i.LON 10 Ethernet Adapter Manual de usuario descargar pdf (Pagina 16)

Table 2-4

DTE Modem requiring a null modem cable to i.LON 10 Adapter

Connection (DB-25 to DB-9)

Modem Signal

Name

Cable DB-25

Male

Cable DB9

Female

i.LON 10 (DTE)

DB-9 Male

DCD Pin 8 Pin 1 DCD—Pin 1

TxD Pin 3 Pin 2 RxD—Pin 2

RxD Pin 2 Pin 3 TxD—Pin 3

DTR Pin 20 Pin 4 DTR—Pin4

GND Pin 7 Pin 5 GND—Pin 5

DSR Pin 6 Pin 6 DSR—Pin 6

RTS Pin 4 Pin 7 RTS—Pin 7

CTS Pin 5 Pin 8 CTS—Pin 8

modem

DB-25

male end

.LON 10

DB-9

male end

Null

Modem

Mounting the i.LON 10 Ethernet Adapter Hardware

To mount the i.LON 10 Ethernet Adapter, follow these steps:

1. Determine if you want to mount the i.LON 10 Ethernet Adapter horizontally

or vertically.

2. Insert two #6 flat-head screws into the surface upon which the i.LON 10 is to

be mounted. For horizontal mounting, these screws should be placed 73.5

mm apart. For vertical mounting, these screws should be placed 37.5 mm

apart. The following template can be printed out and used to set screw

locations:

2-6 i.LON 10 Ethernet Hardware

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 81 82

Sin comentarios

Echelon i.LON 10 Ethernet Adapter Manual de usuario Pagina 16