Echelon Lumewave CPD 3000 Lighting Controller Manual de usuario descargar pdf (Pagina 7)

CPD 3000 Integration Guide 7

Wiring Specification and Diagram

Here are the wiring specifications and diagram for US and European models of the

CPD 3000. The CPD 3000 is not suitable for installing above 15,000 feet altitude.

The controller must be installed in the light fixture, inside a street light pole, or in a

street light cabinet. The CPD 3000 is not intended to be installed in an open

outdoor environment.

US Model

Three AWG 16 wires for AC mains input:

Black Line In

White Neutral In or Line 2 In*

Green Ground

May be powered Line-to-Line if Line-to-Line Voltage is 100-277 VAC and all CPD 3000s, and the

segment controller, are connected to the same circuit pair.

Three AWG 22 wires for control of signal ouput (IEC60929)

Blue 10V signal for PWM control

Black Ground

Violet Signal for 0-10V control

European Model

Three AWG 16 wires for AC mains input:

Brown Line In

Blue Neutral In or Line 2 In*

Green/Yellow Ground

May be powered Line-to-Line if Line-to-Line Voltage is 100-277 VAC and all CPD 3000s, and the

segment controller, are connected to the same circuit pair.

Three AWG 22 wires for control of signal ouput (IEC60929)

Blue 10V signal for PWM control

Black + Signal for 0-10V control

White - Signal for 0-10V control

1 2 3 4 5 6 7 8 9 10 11 12 ... 22 23

Sin comentarios

Echelon Lumewave CPD 3000 Lighting Controller Manual de usuario Pagina 7