Echelon I/O Model Reference for Smart Transceivers and Neu Manual de usuario descargar pdf (Pagina 29)

I/O Model Reference 19

functions because they are included by the Neuron C compiler. The compiler

enforces type checking for the parameters of these functions.

Table 7. General I/O Functions

Function Description

io_change_init( ) Initializes the value of an input object for the

io_changes event

io_edgelog_preload( ) Sets the timer/counter preload value for an

edgelog I/O object

io_edgelog_single_preload( ) Sets the timer/counter preload value for an

edgelog single_tc I/O object

io_in( ) Reads data from an I/O object

io_in_ready( ) An event function that evaluates to TRUE when

a block of data is available to be read from a

parallel I/O object

io_in_request( ) Starts an I/O input cycle for a dualslope I/O

object

io_out( ) Writes data to an I/O object

io_out_request( ) Requests the write token for a parallel I/O object

io_preserve_input( ) Causes the first value obtained from a

timer/counter after reset or an io_select( ) to be

considered valid

io_select( ) Selects one of the multiplexed input objects (see

Multiplexing I/O Models

on page 18)

io_set_baud( ) Changes the bit rate setting for the specified

object

io_set_clock( ) Changes the clock setting for the specified object

io_set_direction( ) Changes the direction of I/O pins associated with

any bit, nibble, or byte I/O objects

See the

Neuron C Reference Guide

for more information about these functions.

The following sections describe the two most common functions and a common

variable.

io_in( ) Function

When a program needs to retrieve signals from a peripheral device, declare an

input object and use the built-in io_in( ) function.

The syntax for the io_in( ) function is:

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 208 209

Sin comentarios

Echelon I/O Model Reference for Smart Transceivers and Neu Manual de usuario Pagina 29